High school Design & Technology students often have to be familiar with a range of appropriate timber finishing techniques and surface treatments and understand how to choose between different wood finishing methods. This article summarises this topic and concludes with sample examination questions.
What is meant by timber finishing? (A definition)
Timber finishing refers to the various surface treatments and protective coatings that are applied to wood surfaces after construction or manufacturing, to improve performance or aesthetics.
What is the purpose of timber finishing?
- Protects timber – providing a barrier to moisture, UV rays, insect infestation, and so on, extending lifespan and preventing rot, warping, or cracking
- Improves functionality – such as creating a smooth surface that is easily wiped clean
- Improves durability – makes surface more resilient, protecting against wear
- Aesthetic enhancement – highlighting natural grain and colour of wood or changing natural appearance of the timber with stains, paints, or laminated coatings
What influences the choice of timber finishing solution?
- Type of timber or manufactured board – some timbers accept stain, varnish, and paint better than others (for example, teak contains natural oils that prevents finishes from properly penetrating and adhering to the wood surface)
- Intended use
- Indoor / outdoor – i.e. exterior paint must have UV protection, moisture resistance, and flexibility to handle temperature swings and exposure to weather conditions
- Contact with food – i.e. cutting boards and countertops require food-safe finishes like beeswax or polyurethane, and wooden floors need very thick, resilient, and durable finishes that can be easily mopped clean like polyurethane
- Moisture exposure – kitchen benchtops or bathroom floors must be much more water resistant than a wooden wardrobe for example
- Desired appearance – for example, a melamine laminated layer (pronounced “meh-luh-meen”) can make a material look like something totally different
- Maintenance requirements – some finishes are harder to upkeep than others (i.e. another layer of linseed oil can just be brushed over the top after wiping the product clean, whereas re-varnishing requires sanding all the old varnish off – although oils must be reapplied more frequently)
- Cost – including initial and maintenance costs
- Difficulty of application – i.e. linseed oil can just be brushed on, with excess oil wiped away, whereas varnish often requires multiple thin coats with careful sanding in between, avoiding getting dust in the layers
- Drying/curing time – some have multiple coats with long drying times, whereas laminated melamine MDF or particleboard panels can be purchased premade
How to prepare timber for finishing
This depends upon the method of finishing, but the approximate process is as follows:
- Ensure timber is dry (ensures proper adhesion of coatings)
- Fill any holes or imperfections with an appropriate wood filler that matches the timber colour (optional)
- Sand the wood surface thoroughly, sanding in direction of grain, moving from rough grit to fine grit sandpaper
- Wipe off all dust completely with a microfibre cloth
- Apply a primer or sealer (undercoat layer) if required, helping prevent natural chemicals in the wood bleeding through the top coat (especially from knots) – this helps the top layers bond well to the surface, fills any minor imperfections (making the top coat smoother), and helps prevent the wood absorbing too much of the top coat, making a shinier finish
- Apply coating (multiple layers as required, ensuring completely dry in between, and sometimes requiring sanding between layers)
Types of wood finishes
SURFACE FINISHES & TREATMENTS FOR TIMBER
Properties
Uses
Properties
Uses
Properties
Uses
Properties
Uses
Properties
Uses
Melamine coatings
Properties
Uses
Note: In manufacturing and design contexts, lamination and veneers are often grouped with other finishing techniques because it serves the same end goals – improving the final surface properties and appearance of a product.
Some modern flatbed printers can print directly onto wooden surfaces, adding graphics and text to sheets of plywood and other wooden items – useful for signage.
Amiria has a Bachelor of Architectural Studies, Bachelor of Architecture (First Class Honours) and a Graduate Diploma of Teaching. She is a CIE Accredited Art & Design and Design & Technology Coursework Assessor. Amiria now teaches Art, Design & Technology at ACG Parnell College.